top of page

EQUIPMENT

Our Capabilities are Limited Only by Your Imagination

CNC Turning
Automated 6-Axis CNC Swiss Turning: 2018 Tsugami B0326-II
AUTOMATED 6-AXIS CNC SWISS TURNING
2018 Tsugami B0326-II
  • Maximum 32mm (1.25”) diameter workpiece, 20” length.

  • Magazine Bar Feeder – EDGE Patriot 338.

  • High precision deflection reducing material holding which allows for increased tolerance maintenance on longer or narrower parts which would otherwise have deflection without large increases to cycle time.

4-Axis Chucked/Bar Fed CNC Turning: 2018 Tsugami M08SY
4-AXIS CHUCKED/BAR FED CNC TURNING
2018 Tsugami M08SY (2 units)
  • Bar Fed: Maximum 56mm (2.2”) diameter - 20” length.

  • Chucked: Maximum 11” x 16”.

  • Live Tooling, sub spindle, Y-axis, automated parts handling.

  • Magazine Bar Feeder – EDGE Patriot 551.

  • High speed and efficiency automated lathe for lights out operation and reduction in operation cost to customers.

Surface Grinding
Surface Grinding: 2018 Okamoto ACC12-24DX Grind-X
2018 Okamoto ACC12-24DX Grind-X
  • Maximum Workpiece 12” x 24” x 12”. • semi-automated.

2018 Chevalier 618SP
  • Maximum Workpiece 6” x 18” x 12”.

  • Newall DRO.

CNC Sawing
CNC Sawing: 2019 Hydmech H-320A
2019 Hydmech H-320A
  • Automatic horizontal band saw.

  • 12.5 “ x 12.5” capacity.

CNC Milling
Automated 5-Axis CNC Milling: 2018 Matsuura MX-520 PC4
AUTOMATED 5-AXIS CNC MILLING
2018 Matsuura MX-520 PC4
  • 90 Tool Magazine Capacity.

  • Maximum automated workpiece dimensions 20.5” x 13.0”, 440 lbs.

  • Can be run in manual load configuration for

  • larger workpieces.

  • Automation and unmanned operational features.

  • Reduces setup steps and allows "lights out" operation while maintaining top of the line accuracy and consistency.

Automated 5-Axis CNC Milling: 2019 Brother Speedio M140X2
AUTOMATED 5-AXIS CNC MILLING
2019 Brother Speedio M140X2 (2 units)
  • Maximum Workpiece 7.9”x17.3”x12.0”, 24.3 lbs.

  • 22 Piece tool capacity.

  • Robotic load and unload with vision system.

  • Reduces setup time and operator handling to ensure cost effective machining and remove errors and inconsistencies related to operator handling.

3/4-Axis CNC Milling: 2018 Brother Speedio S700X1 VMC
3/4-AXIS CNC MILLING
2018 Brother Speedio S700X1 VMC (2 units)
  • Maximum Workpiece 27.6” x 15.7” x 20.0”, 551 lbs.

  • Yukiwa High-speed simultaneous 4th axis.

  • Highly reliable and energy and time efficient machining platform for a variety of customer demanded milled parts.

3/4-Axix CNC Milling: 2019 Brother Speedio S1000X1 VMC
3/4-AXIS CNC MILLING
2019 Brother Speedio S1000X1 VMC
  • Maximum Workpiece 27.6” x 19.7” x 11.8”, 880 lbs.

  • A larger capacity unit equipped to handle larger work pieces with accessibility, rigidity, and power to produce some of the most demanding milled parts in an efficient and compact platform.

3/4-Axis CNC Milling: 2019 Brother Speedio R650X1
3/4-AXIS CNC MILLING
2019 Brother Speedio R650X1
  • Pierson Quick-Change Pallet systems.

  • Equipped with lights out automation package.

  • Maximum Workpiece 25.6” x 15.7” x 17.1”, 300 lbs. • 40 Tool Magazine Capacity.

  • Quick turn table allows automated handling, loading, and unloading increasing machining duty time and practically eliminating idle time to deliver highly consistent, low cost parts to customers as quickly as possible.

2-Axis CNC Milling: 2018 Sharp Knee Mill
2-AXIS CNC MILLING
  • 2018 Sharp Knee Mill, Acu-Rite 2-Axis Control (2 units).

Equipment-Milling-Hurco.jpg
3/4-AXIS CNC MILLING
2018 Hurco VMX42I (5 units)
  • Maximum Workpiece 50.0” x 24.0” x 20.0”, 3,000 lbs.

  • Highly flexible and reliable milling with onboard controls for rapid setup and production of parts not requiring 4th axis operations.

bottom of page